alaamin Hello,
Did you flash the phone with correct firmware?
This is sony with mediatek platform right?
If yes, then you can check by chip off methode using UFi eMMC ToolBox,
pay attention to eMMC Boot Configuration.
I face the same problem long ago, but mine is F3116, and it can be easy repair with UFi Box.
You can try to follow this step by step that works for me:
- Desolder eMCP, open UFI eMMC ToolBox, then Identify eMMC
- Look at the LOG window, it turns out that the Partition Boot setting changes to Boot 2.
Because boot2 has no contents, a.k.a is empty, so the cellphone can't boot.
- Use Preset Ext_CSD -> select MediaTec (generic)
This feature has been in UFI since version 1.2.0.407
Or it could be manual settings via Partition Config.
- After writing the ext_CSD preset is complete,
Identify eMMC again to make sure the boot settings are correct.
- Install the eMCP, and the cellphone returns to normal.
DONE
If possible, for sony devices, do not forget to always make backup, especially for TA Partition.
.
And Here is my Dump Files for Sony Xperia XA F3116 If somebody need it.
