Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G2b (0x483447326211), rev: 0x01, serial number: 0x5754B9DA
Manufacturing date: Jul 2015
CID: 90014A48 34473262 11015754 B9DA72BC
CSD: D07F0132 0F5903FF FFFFFFEF 8A4040DA
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
Current partition access:
Access to boot partition 1
Loading file: "\%BACKUPS%\Samsung\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\boot1.bin", size: 4 MiB...
Writing boot1 (8192 sectors)... Done in 0.886 s
Current partition access:
Access to boot partition 2
Loading file: "\%BACKUPS%\Samsung\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\boot2.bin", size: 4 MiB...
Writing boot2 (8192 sectors)... Done in 1.105 s
Current partition access:
Access to replay-protected memory block (RPM😎
Loading file: "\%BACKUPS%\Samsung\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\rpmb.bin", size: 4 MiB...
Writing rpmb (8192 sectors)... Done in 0.564 s
Current partition access:
Access to user area
Loading file: "\%BACKUPS%\Samsung\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\userarea_256MiB.bin", size: 256 MiB...
Writing userarea (524288 sectors)... Done in 42.012 s
Loading file: "\%BACKUPS%\Samsung\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\ext_csd.bin", size: 512 bytes...
Writing extcsd, 512 bytes... Done.
Failed to initialize eMMC (return code: 6, CMD Error: Invalid Voltage Range) !!!
CMD1 error, cmd response: 0x40FF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
