Failed to Write USB payload error, Please Explain

saifisolutions

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0131
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: FNX2MB (0x464e58324d42), rev: 0x01, serial number: 0xF9AECCED
Manufacturing date: Oct 2017
CID: 15010046 4E58324D 4201F9AE CCEDA462
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 512 KiB
User area: 7.28 GiB(7,818,182,656 bytes)

Current partition access:
Access to boot partition 1
Blank checking boot1 (8192 sectors)... Done in 0.226 s, content is blank
Current partition access:
Access to boot partition 2
Blank checking boot2 (8192 sectors)... Done in 0.226 s, content is blank
Current partition access:
Access to user area
Blank checking userarea (15269888 sectors)... Failed to write usb payload: err: 0x000003E5(Overlapped I/O operation is in progress)

madgoeslim

saifisolutions Failed to write usb payload: err: 0x000003E5(Overlapped I/O operation is in progress)

There are problem with your USB port connections.

saifisolutions EHCI:HUB:HUB:

Avoid to using USB Hub, use direct connection to your PC USB port.

shojib

madgoeslim you are good one sir

DEVVRAT

madgoeslim kon sa modal ka usb hub le sir

DEVVRAT

madgoeslim sir same problem solution plz kon sa modal ka usb hub lu

saifisolutions

Thanks Sir,
Problem Solved.

madgoeslim

saifisolutions You are welcome.
Nice to see you solve the problem.

DEVVRAT

saifisolutions kon sa modal ka usb hun liye ho sir mera same problem he

Shayan

madgoeslim same me but my problem not solve helppp

Shayan

Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-6739
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G4t (0x483847347421), rev: 0x01, serial number: 0xAE7B090E
Manufacturing date: Aug 2015
CID: 90014A48 38473474 2101AE7B 090E8262
CSD: D07F0132 0F5903FF FFFFFFEF 8A400012
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)

Current partition access:
Access to boot partition 1
Loading file: "\%BACKUPS%\Other\H8G4t_AE7B090E\boot1.bin", size: 4 MiB...
Writing boot1 (8192 sectors)... Failed to write usb payload: err: 0x000003E5(Overlapped I/O operation is in progress)
[32]Failed to Switch (return code: 0, CMD Error: ) !!!

DEVVRAT

Shayan same proble sir please solution needed

DEVVRAT

Shayan plx usb hub kon sa le kitne ampiyar ka modal batao sir

Shayan

my problm not solve vcc nd vccq driect umper problem not solve help

madgoeslim

DEVVRAT Please read my reply carefully,
This error is cause by bad USB connection.
Here's the tips for you to try ;

Avoid using USB Hub, use direct connection to your PC USB port,
Change your USB data cable, use short one if possible,
Try another USB port in your PC/Laptop.

Gud Luck

DEVVRAT

madgoeslim thank you so much sir another usb port saleck kiya ho gya 😘😘😘😘😘🤗🤗🤗

cucipiring

DC power to ufi box to low.

Add external DC power to,-
UFI (5v DC) or (5v (ur USB hub spec) DC) USB hub
( pick one) and feel the power.

madgoeslim

DEVVRAT You'r wellcome, glad to hear you solve the problem 🙏