how to update ffu emmc KMQE?
i tried click update emmc fw and input KMQE63MB.FFU
but result:
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: 000000 (0x303030303030), rev: 0x56, serial number: 0x20160613
Manufacturing date: Jun 2016
CID: 15010030 30303030 30562016 061354D0
CSD: 90270132 0F5903FF F6DB7FE0 8A40403A
EXT_CSD revision: 1.5 (MMC v4.41)
Partition info:
Boot1: 512 KiB
Boot2: 512 KiB
RPMB: 128 KiB
User area: 0 B(2,197,796,421,632 bytes)

moviNAND Field firmware update...
Part name:
Product name: QE63MB (0x514536334d42), rev: 0x03
You may disconnect the emergency boot mode TP now !
Switch to boot mode(3)... Done.
Sending firmware, size: 301 KiB... send failed at offset: 0x00000000
Please try again!

not working lol just fake update nothing new just more bugs

    and after update emmc fw result stuck Product name: 000000

      Princex Hello, please respect others by posting usefull reply or post, otherwise just remain silent if you can't help others.
      ADD: eMMC5x Field Firmware Update support
      This Field Firmware Update (FFU) is a standart feature introduced to eMMC 5.0 or later
      FFU on eMMC5x is slighly different compared to movinand custom ffu, it will not erase data or reset eMMC config.
      If this is not usefull for you, then just simply don't use that.

      zona and after update emmc fw result stuck Product name: 000000
      Your emmc is stuck in boot mode, not possible for repair. Just replace with the new one.

            Princex And thanks for your honesty. It's demeaning, insulting, vilifying, it's all free, so just take it all.

              Write a Reply...