Connection status: EHCI:HUB:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-5166
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QX13MB (0x515831334d42), rev: 0x07, serial number: 0x3901C62A
Manufacturing date: Sep 2016
CID: 15010051 5831334D 42073901 C62A93DA
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
eMMC 5.x HEALTH report:
Device lifetime: Normal
Estimation of the device lifetime (SLC): 30% - 40% device life time used
Estimation of the device lifetime (MLC): 30% - 40% device life time used
moviNAND Smart report:
Error Mode: 0x00000000 (Invalid)
Smart report in MMC5x has changed and not supported for this device(use eMMC 5.x HEALTH report instead).
Connection status: EHCI:HUB:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-5166
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QX13MB (0x515831334d42), rev: 0x07, serial number: 0x3901C62A
Manufacturing date: Sep 2016
CID: 15010051 5831334D 42073901 C62A93DA
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Writing eMMC partition settings...
Set general purpose partition... Done
Set write reliability setting... Cannot set write reliability parameters, WR_REL_SET in this device is read-only.
Could not write 1F to EXT_CSD[167]
Set OTP Partitioning setting completed... failed!
