Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x11 (Toshiba)
Product name: 016GE2 (0x303136474532), rev: 0x00, serial number: 0x0F312C97
Manufacturing date: Haz 2015
CID: 11010030 31364745 32000F31 2C976238
CSD: D05E0032 0F5903FF FFFFFFEF 924000D2
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.68 GiB(15,758,000,128 bytes)
Current partition access:
Access to boot partition 1
Loading file: "\%BACKUPS%\ASUS\K00X(ME375CL)MP_preburn_image_11.16.0.92.1\boot1.bin", size: 4 MiB...
Writing boot1 (8192 sectors)... Done in 0.445 s
Current partition access:
Access to boot partition 2
Loading file: "\%BACKUPS%\ASUS\K00X(ME375CL)MP_preburn_image_11.16.0.92.1\boot2.bin", size: 4 MiB...
Writing boot2 (8192 sectors)... Done in 0.440 s
Current partition access:
Access to user area
Loading file: "\%BACKUPS%\ASUS\K00X(ME375CL)_MP_preburn_image_11.16.0.92.1\userarea.bin", size: 14.68 GiB...
Writing userarea (30777344 sectors)... Failed to write block 0x00000000:65536 (return code: 1, CMD Error: Timeout)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
[32]Failed to Switch (return code: 1, CMD Error: Timeout) !!!
