Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-1009
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done.
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hB8aP (0x68423861503e), rev: 0x03, serial number: 0x6633A197
Manufacturing date: Jun 2019
CID: 90014A68 42386150 3E036633 A19766B4
CSD: D0270032 8F5903FF FFFFFFEF 8E400042
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Factory Reset...
Creating filesystem with parameters:
Size: 343932928
Block size: 4096
Blocks per group: 32768
Inodes per group: 7008
Inode size: 256
Journal blocks: 1312
Label:
Blocks: 83968
Block groups: 3
Reserved block group size: 23
Created filesystem with 13/21024 inodes and 2687/83968 blocks
Writing cache... Done.
Creating filesystem with parameters:
Size: 25384955904
Block size: 4096
Blocks per group: 32768
Inodes per group: 8160
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 6197499
Block groups: 190
Reserved block group size: 1024
Created filesystem with 11/1550400 inodes and 141348/6197499 blocks
Writing userdata... Unknown chunk type 0x0000 at 0x0260A0C4
Wrote 5100712 blocks, expected to write 6197499 blocks
Done.
Done.
pleas help
