Redmi 6A Failed Flash 9 credit gone

123

always failed when flashing redmi 6a, even with oficial firmware, fisrt try succes now always failed, already try changing device still same problem, try to email support nothing answer. device is on
here log

AUTH info: MTK, version: 1
Firmware package: Disable_Redmi_6_Mi_Account&Frp_File
BROM version[1]: 7.1945.3.0
DA: MTK_AllInOne_DA[0].bin
hash: 19472e1a8df5a6c65368f77651f293b31d720393, size: 1.01 MiB
version: 3.3001.2019/12/12020/07/07 12:34:59, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Done
Detected [BootROM] MediaTek USB Port (COM40)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
[SERVER] XIAOMI_FL [cactus,d76c67aa50cc1839] ref id: XF02798186765, cost: 3, your balance: 8
Sending Download Agent...
Error: 0xC0060003 (STATUS_BROM_CMD_SEND_DA_FAIL)
[H/W] Fail to download DA to baseband chip's internal SRAM!
There's a cable communication problem or target might be shutdown unexpectedly or target lost power supply
Platform: MT6765, Hw ver: 0xCA00, Sw ver: 0x0000
Error: 0xC0060003 (STATUS_BROM_CMD_SEND_DA_FAIL)
[H/W] Fail to download DA to baseband chip's internal SRAM!
There's a cable communication problem or target might be shutdown unexpectedly or target lost power supply
(boot_rom.cpp, line:329)
%[
You have used 1 out of 10 slot for today.
You have used 1 available XIAOMI_FL slot for this phone, you have 2 try left to try again in case this task fails.
Please pay attention to the error messages and spesific hints before retry !!!
You are paying for authorization access and NOT the task, there is no refund for failed tasks and tasks with 3 retry
Refunds are only for failed tasks because of server issues, software issues or bugs and unknown problem with no retry !!!
You may retry the task for more times without further authorization as long as you don't unplug the USB cable, change brand or model selection or close the application.
%]
There might be incompability problem with the firmware or loaders, please verify your flash settings.
There is no refund for this case, you may retry after 3 hours
name: MTK_PLATFORM_CFG

here with official rom

name: MTK_PLATFORM_CFG
version: V1.1.2
platform: MT6765
project: cactus
storage: EMMC
bootChannel: MSDC_0
blockSize: 0x00020000
MTK Preloader file info.
Found 11 supported eMMC CID:
[SK Hynix] HBG4a2 90014A48 42473461 32xxxxxx xxxxxxxx
[SK Hynix] hB8aP 90014A68 42386150 3Exxxxxx xxxxxxxx
[SK Hynix] HAG4a2 90014A48 41473461 32xxxxxx xxxxxxxx
[Micron] S0J9B7 13014E53 304A3942 37xxxxxx xxxxxxxx
[Samsung] QE63MB 15010051 4536334D 42xxxxxx xxxxxxxx
[Samsung] GD6BMB 15010047 4436424D 42xxxxxx xxxxxxxx
[Micron] S0J9A7 13014E53 304A3941 37xxxxxx xxxxxxxx
[Samsung] RH64AB 15010052 48363441 42xxxxxx xxxxxxxx
[SK Hynix] HCG8a4 90014A48 43473861 34xxxxxx xxxxxxxx
[Samsung] QD63MB 15010051 4436334D 42xxxxxx xxxxxxxx
[Samsung] GP6BMB 15010047 5036424D 42xxxxxx xxxxxxxx
AUTH info: MTK, version: 1
Firmware package: cactus_global_images_V10.2.7.0.OCBMIXM_20190221.0000.00_8.1_global\images
BROM version[1]: 7.1945.3.0
DA: MTK_AllInOne_DA[0].bin
hash: 19472e1a8df5a6c65368f77651f293b31d720393, size: 1.01 MiB
version: 3.3001.2019/12/12020/07/03 09:00:23, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Done
Detected [BootROM] MediaTek USB Port (COM40)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
[SERVER] XIAOMI_FL [cactus,71e5568874456bfd] cost: 0, retry: 3, your balance: 1
Sending Download Agent...
Error: 0xC0060003 (STATUS_BROM_CMD_SEND_DA_FAIL)
[H/W] Fail to download DA to baseband chip's internal SRAM!
There's a cable communication problem or target might be shutdown unexpectedly or target lost power supply
Platform: MT6765, Hw ver: 0xCA00, Sw ver: 0x0000
Error: 0xC0060003 (STATUS_BROM_CMD_SEND_DA_FAIL)
[H/W] Fail to download DA to baseband chip's internal SRAM!
There's a cable communication problem or target might be shutdown unexpectedly or target lost power supply
(boot_rom.cpp, line:329)
%[
You have used 2 out of 10 slot for today.
You have used 2 available XIAOMI_FL slot for this phone, you have 1 FREE slot left to try again in case this task fails.
You are paying for authorization access not the task, there is no refund for failed tasks and tasks with 3 retry
Refunds are only for failed tasks because of server issues, software issues or bugs and unknown problem with no retry !!!
We found that you have used XIAOMI_FL service with this phone before with status FAILED.
Before using another authorization, please check that the phone have a good working hardware and you are using the correct firmware.
You can use this FREE slot before Sat, 01 Aug 2020 09:53:41 GMT.
You may retry the task for more times without further authorization as long as you don't unplug the USB cable, change brand or model selection or close the application.
%]
There might be incompability problem with the firmware or loaders, please verify your flash settings.
There is no refund for this case, you may retry after 3 hours

here log i used credit

20-03-2020 12:05 XF09965434440 XIAOMI_FL cactus bc12a7f3c21616a6.. 3 1 success X450LCP-BSN12345678901234567], 36.68.6.16
02-07-2020 09:36 XF01303126403 XIAOMI_FL cactus 71e5568874456bfd.. 3 3 failed X450LCP-BSN12345678901234567], 125.162.67.200
02-07-2020 16:53 XF00398968303 XIAOMI_FL cactus 71e5568874456bfd.. 3 3 failed X450LCP-BSN12345678901234567], 125.162.67.200
07-07-2020 13:07 XF02798186765 XIAOMI_FL cactus d76c67aa50cc1839.. 3 1 failed X450LCP-BSN12345678901234567], 36.83.191.178

123

123 here first log when i used flash redmi 6a for the first time

UFI software version: 1.4.0.1668
Official website:
https://www.ufi-box.com
Official support forums:
https://www.ufixers.com
https://www.martview-forum.com/forums/ufi-box-dongle.183
Official facebook page:
https://www.facebook.com/ufiboxdongle
Official youtube channel:
https://www.youtube.com/ufixers
System info:
Processor: Intel(R) Core(TM) i5-4200U CPU 2.32 GHz (4 CPUs)
Installed RAM: 3.88 GiB (46 % free)
OS: Windows 10 Professional (Version 10.0, Build 18362, 64-bit)
Storage:
Disk space: 164.08 GiB (18.53 GiB available)
Disk space(firmware packages): 1.18 TiB (3.98 GiB available)
Loaded drivers:
[Microsoft] WINUSB, version: 1.1.0.0, date: 8-30-2012

Please "Identify Device" at first, before any other operation.

Access violation at address 0040A304 in module 'UFI.exe'. Read of address 003A003F

storage id: HAG4a2, QE63MB, H8G1e, HAG2e, RX1BMB, H8G2d, R311MB, P1J95K, FN62MB, 032G34, QN16MB, AJNB4R, QD63MB, BJNB4R, CJNB4R, QE13MB, Q3J97V, RH64AB, Q72SMB, GD6BMB, Q3J96R, HCG8a4
Overview:
- Flashing, erase frp, erase userdata supported
for Qualcomm platform, go to \FLASH:QUALCOMM
for MediaTek platform, go to \FLASH:MEDIATEK
- For new models, flashing requires bootloader authorization by server
- Any Bootloader authorization will consume credit, use it with caution at your own risk !!!
- To avoid any troubles, please always use official firmware !!!
- For new models, flashing requires server authentication and UFI CREDIT, go to \ACCOUNT for the list of services and costs
!!! WARNING !!!
- Authorization should only be used for normal flashing with official firmware that match to your model
Any Special Tasks in MediaTek platform require write access and will not work for this model due to secure boot.
- Service cost for [Xiaomi] Redmi 6A:
XIAOMI_FL(Bootloader Authorization(QC, MTK) - Including Identify, Flashing, SpecialTask): 3 credits
Make sure to select the CORRECT phone model and storage type !
Do not rename the phone model directory !
Every Special Tasks will needs to use Bootloader Authorization, you pay for authorization not the specific task !!!
Please turn off your "Find device" before flashing, bootloader authorization will not work when "Find device" is turned ON.
You have to select the CORRECT firmware that match your phone model before Identify !!!
name: MTK_PLATFORM_CFG
version: V1.1.2
platform: MT6765
project: cereus
storage: EMMC
bootChannel: MSDC_0
blockSize: 0x00020000
name: MTK_PLATFORM_CFG
version: V1.1.2
platform: MT6765
project: cereus
storage: EMMC
bootChannel: MSDC_0
blockSize: 0x00020000
MTK Preloader file info.
Found 10 supported eMMC CID:
[SK Hynix] HBG4a2 90014A48 42473461 32xxxxxx xxxxxxxx
[SK Hynix] hB8aP 90014A68 42386150 3Exxxxxx xxxxxxxx
[SK Hynix] HAG4a2 90014A48 41473461 32xxxxxx xxxxxxxx
[Micron] S0J9B7 13014E53 304A3942 37xxxxxx xxxxxxxx
[Samsung] QE63MB 15010051 4536334D 42xxxxxx xxxxxxxx
[Samsung] GD6BMB 15010047 4436424D 42xxxxxx xxxxxxxx
[Micron] S0J9A7 13014E53 304A3941 37xxxxxx xxxxxxxx
[Samsung] RH64AB 15010052 48363441 42xxxxxx xxxxxxxx
[SK Hynix] HCG8a4 90014A48 43473861 34xxxxxx xxxxxxxx
[SK Hynix] HCG8a4 90014A48 43473861 34xxxxxx xxxxxxxx
AUTH info: MTK, version: 1
Firmware package: Disable_Redmi_6_Mi_Account&Frp_File
BROM version[1]: 7.1945.3.0
DA: MTK_AllInOne_DA[0].bin
hash: 19472e1a8df5a6c65368f77651f293b31d720393, size: 1.01 MiB
version: 3.3001.2019/12/12020/03/20 12:03:33, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Done
Detected [BootROM] MediaTek USB Port (COM4)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
[SERVER] Error: Invalid DA selection for [Xiaomi] cactus, please select the correct DA !
Platform: MT6765, Hw ver: 0xCA00, Sw ver: 0x0000
(boot_rom.cpp, line:1280)
Bootloader authorization failed.
AUTH info: MTK, version: 1
Firmware package: Disable_Redmi_6_Mi_Account&Frp_File
BROM version[1]: 7.1945.3.0
DA: MTK_AllInOne_DA_4-19_-signed.bin
hash: c8fa00811a246c975e865b14121d0f527fe674a2, size: 542.12 KiB
version: 3.3001.2018/04/12018/04/19 19:47:39, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Done
Detected [BootROM] MediaTek USB Port (COM4)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
[SERVER] XIAOMI_FL [cactus,bc12a7f3c21616a6] ref id: XF09965434440, cost: 3, your balance: 2
Sending Download Agent...
Platform: MT6765, Hw ver: 0xCA00, Sw ver: 0x0000
Secure ver: 0x00, BL ver: 0x00
Secure config: 0x00
SRAM size: 256 KiB
DRAM size: 512 MiB
SOC ID: bc12a7f3c21616a6c565ba3e696080dde7f6bb1c8ed9e5b74e66ca83ca74e837
ME ID: 7bee7f4871da8df3076c22baba440583
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0x2D8196B3
Manufacturing date: Nov 2018
CID: 15010051 4536334D 42032D81 96B3B57B
Capacity: 14.57 GiB(15,646,851,072 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB (key exist)
User area: 14.56 GiB(15,634,268,160 bytes)
USB speed: High-Speed
Verifying SoC: passed
Verifying CID: passed
Writing frp_Remove, size: 538.66 KiB
Writing Account_Remove_Gsmdevelopers, size: 538.66 KiB
Completed in 20.195 s
You have used 1 available XIAOMI_FL slot for this phone, you have 2 FREE slot left to try again in case this task fails.

You may retry the task for more times without further authorization as long as you don't unplug the USB cable, change brand or model selection or close the application.

123

Up up

123 madgoeslim

What exactly do you want to ask?
There are very clear and detail instruction how to use the credit, if you don't understand, please avoid to use such service.
So use it with precaution.
Many people have success doing flashing, even reset account of this device using ufibox, and they even create so many videos how to do that.
You may start to seeing this so many video guide here.