Redmi Note 6 Pro Dead

kapiltech1

Hi Team, Plz help me to sort out redmi note 6 pro dead problem,
i pull out the emmc & check with UFI, but getting error,
plz check log below

Connection status: XHCI:HUB3:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number:
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: Card (removable) - MMC
Manufacturer ID: 0x02 (SanDisk)
Product name: SDM032 (0x53444d303332), rev: 0x90, serial number: 0xFFFFFFFF
Manufacturing date: Feb 2022
CID: 02000053 444D3033 3290FFFF FFFF29BC
CSD: 8C0F002A 015981E9 B6D9FC1F 8A4040AA
Failed to read EXT_CSD !!!

madgoeslim

kapiltech1 VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 52MHz)

Hi,
You pull out the emmc, so try to force run in 8bit while Identify the emmc.

Failed to read EXT_CSD !!!

This mostly caused by unstable dat0 connection, or unstable pull up power.
Please reball the chip before insert it to the emmc adapter for best connection, try to manually set the Vccq to different voltage if possible.

GudLuck