Ufi emmc identity error

Aslam-th

When i try to emmc identify getting this error pls help….

Connection status: EHCI:HUB:HUB:USB 2.00 High-speed
Interface: UFI High-Speed
Serial number: 0011-8842-9999
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
--- Try to use 1 bit connection ---
Check your connection, make sure eMMC inserted properly.

madgoeslim

Aslam-th --- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
--- Try to use 1 bit connection ---

Hi,
Please heed the advice from the log window,
if you've done everything and still find the same error,
it's possible that the chip is indeed damaged.

cucipiring

did u trying to update ffu and fail before?