please I need help with a samsung a042f it's dead,I tried to unbrick with dump file and bootloader but no positive results tested dump file is needed [new ufi box user ] experts plz help me

do not erase any partition. the simplest solution is repair primary GPT on USERAREA

    can you help me with a tutorial of the process,and how do I repair the GPT on userdata

      back all security and dead boot repair files scatter files

      12 days later

      Boot version: 1.05, FW version: 1.15 (Nov 8 2022 18:51:23)
      Insertion test... Done
      Init bus...
      VCC: 3.3 V, VCCQ: 1.8 V
      Bus: 1 bit (SDR 4MHz)
      Access mode: sector mode
      Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
      Card/BGA: BGA (Discrete embedded) - High density MMC
      Manufacturer ID: 0x15 (Samsung)
      Product name: 4X62MB (0x345836324d42), rev: 0x04, serial number: 0x0AD1C1AA
      Manufacturing date: Feb 2023
      CID: 15010034 5836324D 42040AD1 C1AA2AAE
      CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
      Firmware version: 0x04
      EXT_CSD revision: 1.8 (MMC v5.1)
      Partition info:
      Boot1: 4 MiB
      Boot2: 4 MiB
      RPMB: 16 MiB [Authentication Key not yet programmed]
      User area: 29.12 GiB(31,268,536,320 bytes)
      Cache size: 64 MiB
      Hardware reset function: 1
      Secure Write Protect Information: 0x01
      Secure Feature support: 0x55
      Partition configuration: 0x48
      Boot acknowledge is sent during the boot operation
      Boot partition 1 is enabled for boot
      Partitioning support: 0x07
      Device support partitioning feature
      Device can have enhanced technological features
      Device partitioning possible
      Boot configuration protection: 0x00
      Boot bus conditions: 0x02
      Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
      Boot area write protection: 0x00
      eMMC detected: [SAMSUNG] KM4X60012M-BXXX/32GB
      with this log plz help me repair boot

      7 months later
      Write a Reply...