Huawei g610-u20 emmc pinout need

Shahjee

I need huawei g610-u20 emmc pinout

Got two phones with problem
Cant remove patteren
After hardreset still on patteren
Cant flash via dload,
Cant flash via sptool
How i can repair both fones
I have new emmc ,
What is correct way to repair those fones
Plz guide

madgoeslim

Shahjee After hard reset pattern not remove, then check internal storage. Commonly eMCP write protection active.

vasilbojilov

Shahjee
Why you not write signed firmware for that phone?
Well be easy and do not waste your time for eMMC removing wiping and other

Shahjee

Thanks for ur kind reply
Can u plz provide emmc pinout
Or i have to just replace emmc
And write factory files
And this phone is secure boot
What about imei after new emmc
Plz guide
And how to check compatible emmc with scatter

Thanks in advance

madgoeslim

Unfortunately there are no pinout for this device yet. If emmc not protected by hard glue, then remove chip and backup with UFI eMMC ToolBox. Supported chip in mediatek based device available in preloader, or just load boot1 file will also listing compability emmc with device. GudLuck.

Shahjee

madgoeslim ok Boss i will try to remove , emmc is glued ,
I have skill with drilling
But this device is glued ,
Wish me luck for safe processor 🙂

h5ha

Shahjee

master Shahjee
I have same your problem if you remove eMMC
can you give me isp pinout
VCCQ VCC CMD CLK DAT
SM-G6100

ProOFF

Hot air, slightly blunted needle from an insulin syringe and skill. I do so, and memory can be reused.

h5ha

master Shahjee
I have same your problem if you remove eMMC
can you give me isp pinout
VCCQ VCC CMD CLK DAT

h5ha

enter image description here

Shahjee

h5ha this is bga221
In huawei g610-u20 have bga162 emmc
I know under emmc pinout
I needed on board pinout ,
Anyway removed emmc ,
Emmc is dead ...🙁
And cant find full pinout on board
Clk and cmd is missing no connection......

winpinph

Shahjee aww, sorry for that..it's really hard to remove glued ic

ProOFF

clk and cmd not on top layer.

GSMBoot

ProOFF good

Alexid7

SAMSUNG i8530 projector isp pinout need

MahamedDiab

master Shahjee
I have same your problem if you remove eMMC
can you give me isp pinout
VCCQ VCC CMD CLK DAT

Shahjee

MahamedDiab dear bro this model not have emmc pinout on board,
Remove emmc,
Put new emmc ,
And just flash via any mtk flasher

Fmobile

need dump huawei g610-u20

Fmobile

https://fmobilefeni.blogspot.com/2019/08/huawei-g610-u20-dump-file.html