Looking for dum eMMC for Samsung SM-T585

Kallter

Hey. I'm looking for an eMMC dump for Samsung SM-T585 for writing to a new memory chip.

Aidin01

Kallter dear your tablet is exynos platform so you can only write BL-PIT file in image tab on your emmc and solder emmc to pcb then put the tablet on download mode after that flash the tablet with same firmware that you used BL File of that and after flashing its fixed and only you shold repair imei thats it

Kallter

Aidin01

And what a correct one Ext CSD will it be for this device?

madgoeslim

Kallter Will auto set during write factory image.

Kallter

After recording through Factory Image, the tablet does not start and does not enter the Download mode. Share the dump of the first 512 MB, I'll try to restore the tablet with the help of a dump, then I'll unsubscribe the results.

One more question: is it possible to install memory on the Exynos platform, as well as on Qualcomm machines, not exactly the same, but memory with the same revision of MCP (In this MCP 5.1 Ext_Csd rev.1.8)

Kallter

I make a write on the vendor, everything is stitched. I insert the board into the device, it does not enter the Download mode, it does not respond to JIG. The following device appears briefly in the Device Manager. What am I doing wrong?

Photo 1
Photo 2

Aidin01

Kallter this is because your emmc is not good connected to the board i mean is not perfect soldered to the mainboard PCB

YohanQuantumphonesvc

if factory image fail ... sure you must find dump for it

fregis10

Please I need ISP Samsung T585