here is identify LOG before dead and locked :
[ Open \ISP Pinout picture ]
Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-1058
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0x30A99BA2
Manufacturing date: May 2019
CID: 15010051 4536334D 420330A9 9BA25622
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
EXT_CSD backup saved to "\%BACKUPS%\QE63MB_30A99BA2.ext_csd"
ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: Realme
board: RM6762_18540, name: RMX1941
brand: Realme, model: RMX1941
build model list: RMX1941
build id: PPR1.180610.011, version: 9 Pie (RMX1941EX_11_A.12)
build description: full_oppo6762_18540-user 9 PPR1.180610.011 eng.root.20190617.165850 release-keys
crypto state: encrypted?
crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMQE60013M-B318/16GB+LPDDR3 16Gb (BGA221)

LOG factory reset :
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-1058
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... VCCQ, CMD, DAT0 not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 48MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0x30A99BA2
Manufacturing date: May 2019
CID: 15010051 4536334D 420330A9 9BA25622
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)
Factory Reset...
Creating filesystem with parameters:
Size: 343932928
Block size: 4096
Blocks per group: 32768
Inodes per group: 7008
Inode size: 256
Journal blocks: 1312
Label:
Blocks: 83968
Block groups: 3
Reserved block group size: 23
Created filesystem with 13/21024 inodes and 2687/83968 blocks
Writing cache... Done
Creating filesystem with parameters:
Size: 9750687744
Block size: 4096
Blocks per group: 32768
Inodes per group: 8160
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 2380539
Block groups: 73
Reserved block group size: 583
Created filesystem with 11/595680 inodes and 75412/2380539 blocks
Writing userdata... Done
Done

here is LOG after factory reset :
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-1058
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... VCCQ, CMD, DAT0 not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0x30A99BA2
Manufacturing date: May 2019
CID: 15010051 4536334D 420330A9 9BA25622
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: Realme
board: RM6762_18540, name: RMX1941
brand: Realme, model: RMX1941
build model list: RMX1941
build id: PPR1.180610.011, version: 9 Pie (RMX1941EX_11_A.12)
build description: full_oppo6762_18540-user 9 PPR1.180610.011 eng.root.20190617.165850 release-keys

Internal storage: 9.08 GiB
crypto state: unencrypted
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMQE60013M-B318/16GB+LPDDR3 16Gb (BGA221)

i think the problem is Device is not boot-enabled (default). what should i do?

strong textstrong textstrong text