I do not think this damaged, is the fifth and in nand test sheds this:
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G1d (0x483447316404), rev: 0x05, serial number: 0x0BA20580
Manufacturing date: dic 2014
CID: 90014A48 34473164 04050BA2 0580C178
CSD: D0270132 0F5903FF FFFFFFEF 8A4040D2
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
Current partition access:
Access to boot partition 1
Writing random bytes to boot1, sector: 6614... Done in 0.007 s
Verifying... Done in 0.002 s, content verified successfully.
Current partition access:
Access to user area
Writing random bytes to userarea, sector: 1186489... Done in 0.004 s
Verifying... Done in 0.002 s, content verified successfully.
And when trying to write always throws this same error:
nsertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G1d (0x483447316404), rev: 0x05, serial number: 0x0BA20580
Manufacturing date: dic 2014
CID: 90014A48 34473164 04050BA2 0580C178
CSD: D0270132 0F5903FF FFFFFFEF 8A4040D2
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
Loading file: "\%BACKUPS%\LGE\LG-D390(KTU84P-4.4.4-KTU84P)[H9TP32A8JDACPR-KGM_0AA25CA7]\ext_csd.bin", size: 512 bytes...
Writing extcsd, 512 bytes... Done.
Failed to initialize eMMC (return code: 6, CMD Error: Invalid Voltage Range) !!!
CMD1 error, cmd response: 0x40FF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
Clarification is BGA162.
