EMMC check problem: Page 3 - UFIXERS Community

EMMC check problem

ChandanBodh

i cant factory reset emmc bga221
identyfiy ok but cant factory reset and nand test

Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-5819
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x70 (Kingston)
Product name: EH8EE8 (0x454838454538), rev: 0x01, serial number: 0x14DE8CE0
Manufacturing date: May 2017
CID: 70010045 48384545 380114DE 8CE0540C
CSD: D04F0132 0F5903FF FFFFFFEF 8A400060
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.13 GiB(7,650,410,496 bytes)
Cache size: 512 KiB
Partition configuration: 0x08
No boot acknowledge is sent (default)
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: sc8830, cpu abi: armeabi-v7a
manufacturer: ZEN Mobile
board: ZEN, name: M72_Smart
brand: ZEN, model: M72 Smart
build id: NRD90M, version: 7.0 Nougat (ZEN_M72_Smart_Software_V8_19092017_164552)
build description: sp9832a_2h11_4mvoltesea_tee-user 7.0 NRD90M eng.zhangh.20170919.164412 release-keys

Internal storage: 4.38 GiB
crypto state: unencrypted

reza1911

Connection status: XHCI:HUB3:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-3303
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G4u (0x483847347592), rev: 0x01, serial number: 0x20B8A4A2
Manufacturing date: Apr 2017
CID: 90014A48 38473475 920120B8 A4A244C0
CSD: D0270132 0F5903FF FFFFFFE7 8A40002A
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)

Current partition access:
Access to boot partition 1
Loading file: "\%BACKUPS%\Samsung\G532\boot1.bin", size: 4 MiB...
Writing boot1 (8192 sectors)... Done in 8.877 s
Current partition access:
Access to boot partition 2
Loading file: "\%BACKUPS%\Samsung\G532\boot2.bin", size: 4 MiB...
Writing boot2 (8192 sectors)... Done in 8.785 s
Current partition access:
Access to user area
Loading file: "\%BACKUPS%\Samsung\G532\userarea.bin", size: 7.28 GiB...
Writing userarea (1048576 sectors)... Failed to write block 0x00870000:65536 (return code: 1, CMD Error: Timeout)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
[32]Failed to Switch (return code: 1, CMD Error: Timeout) !!!

i don't know why like the device disconnected automaticly

mhaghnegahdar

im also face the same problem, how to solve? Set both voltages to "auto"
Failed to initialize eMMC (return code: 6, CMD Error: Invalid Voltage Range) !!!

Shaktiranjan

Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0411
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 20, CMD Error: Invalid response) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---

WenkzDarmawan

klemat ,i'm in indonesia darmawan cell from Bekasi. Im permission to joint group ufixers.
Im understand direct emmc samsung g532, j2 prime in ufi identify log Failed to initialize eMMC (return code:0, CMD error🙂!!!
Any solution to prublem brow...???
Im newby.. Thanks u.

EMMCfailed

hi i have a same problem that say
"card might be dead for old movinand samsung emmc you may update the firmware"
and im looking for the test point in emmc but sadly i can't find.
the emmc serial is SKHYnix H9TQ17ABJTCC
![https://i.ibb.co/2FrLwQh/100-New-Original-H9-TQ52-ACLTMCUR-KUM-BGA-EMCP-H9-TQ52-ACLTMC-URKUM.jpg][1]

Basant

sir emmc helth report invalid solution ufi box

Chennai

madgoeslim hi bro

Malhari

Failed to read block for verify 0x00000000:65536 for verify (return code: 4, CMD Error: Invalid response)
cmd response: 0x800900, card status: 0x800000, card state: 4 (Card is in transfer state)
status: The CRC check of the previous command failed.
--- Make sure the connection between BOX and eMMC stable ---

Malhari

Malhari help me plz

ajmla

VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RD64MB (0x524436344d42), rev: 0x01, serial number: 0xB32606C8
Manufacturing date: Jan 2018
CID: 15010052 4436344D 4201B326 06C815F0
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)

Current partition access:
Access to boot partition 1
Writing random bytes to boot1, sector: 0... Failed to write block 0x00000000:1024 (return code: 1, CMD Error: Timeout)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
NAND storage "boot1" partition test failed!

madgoeslim

ajmla Current partition access:
Access to boot partition 1
Writing random bytes to boot1, sector: 0... Failed to write block 0x00000000:1024 (return code: 1, CMD Error: Timeout)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
NAND storage "boot1" partition test failed!

Nand test failed means emmc is damage, replace with new one if possible.

ghayoum1

what is wrong?
tested in easyjtag /not problem
socket worked an other emmc
test other file

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-7872
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: R821MB (0x523832314d42), rev: 0x00, serial number: 0xF744DA0F
Manufacturing date: Nov 2015
CID: 15010052 3832314D 4200F744 DA0FB2C8
CSD: D0270132 0F5903FF F6DBFFEF 92404008
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)

Current partition access:
Access to boot partition 1
Loading file: "\%BACKUPS%\HTC\HTC_One_E9s_dual_sim(LRX22G_release-keys-5.0.2-LRX22G)[H26M52103FMR_3CA1654B]\boot1.bin", size: 4 MiB...
Writing boot1 (8192 sectors)... Failed to write block 0x00000000:65536 (return code: 1, CMD Error: Timeout)
cmd response: 0xC00, card status: 0x0, card state: 6 (Card is receiving operation information)
status: unknown (0)
[32]Failed to Switch (return code: 1, CMD Error: Timeout) !!!

Vikas

i have allso same problam solution plz

Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-6940
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GD6BMB (0x474436424d42), rev: 0x01, serial number: 0x98C0D81C
Manufacturing date: Feb 2018
CID: 15010047 4436424D 420198C0 D81C2592
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)

Reading modem at 0x04000000-0x093FFFFF size: 84 MiB... Failed to read block 0x05400000:0 (return code: 1, CMD Error: Timeout)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
--- Try to decrease the clock speed ---
--- Make sure the connection between BOX and eMMC stable ---
--- please try again (you may RESUME the read process) ---

madgoeslim

Apu boot size and rpmb resize option

This option is available for samsung chip only.

Vikas --- Try to decrease the clock speed ---
--- Make sure the connection between BOX and eMMC stable ---
--- please try again (you may RESUME the read process) ---

Apu

hello sir.this is onportent problem my boot size and rpmb resize option not showing and how to solve please fix this problem

Mbpreem

madgoeslim clock speed

GsmHamid

H9TP32A4GDBCPR-KGM this emmc bga number / test point need

madgoeslim

GsmHamid H9TP32A4GDBCPR-KGM

Hi,
This is hinyx chip, ffu for this kind of chip is not supported, so testpoint is also not available.

Aryan

Connection status: EHCI:HUB:HUB[#5]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-3997
Boot version: 1.04, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 3MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G2b (0x483447326211), rev: 0x01, serial number: 0x4210B94F
Manufacturing date: Apr 2016
CID: 90014A48 34473262 11014210 B94F438A
CSD: D07F0132 0F5903FF FFFFFFEF 8A4040DA
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Authentication Key not yet programmed]
User area: 3.64 GiB(3,909,091,328 bytes)

Current partition access:
Access to boot partition 1
Writing random bytes to boot1, sector: 0... Failed to write block 0x00000000:1024 (return code: 1, CMD Error: Timeout)
cmd response: 0xB00, card status: 0x0, card state: 5 (Card is sending an operation)
status: unknown (0)
NAND storage "boot1" partition test failed!

« Previous Page Next Page »