Again about Meizu Pro7-S (M792Q-L) connect

smtel

I have Meizu Pro7-S (M792Q-L) with user lock code, try to connect with different DA, but always
"Error: 6029 (S_SECURITY_SEND_AUTH_FAIL)"

only with "auth_sv5[oem]" any progress with connect, but again error:
"Error: 6004 (S_SECURITY_SLA_FAIL)
[AUTH] Serial link authentication failed"

read the following topics:
https://ufixers.com/d/1490-meizu-pro-7-h-and-android-toolbox
https://ufixers.com/d/1829-meizu-pro-7-unlock-accaunt
https://ufixers.com/d/1125-meizu-pro7s-da
but did not understand - is this device supported or not? the oldest topic of Pro 7 from the 1st of February,but there is no progress to work with these models, why?

VoTan

you need use only win 7 64bit , and download rom for support ufi, choose rom for tab, ufi auto choose DA and auth . choose only userdata and cache . choose flash, for phone , volume down . connect phone to pc

smtel

VoTan This instruction not work

any answers from support?????????

smtel

What is this forum for if developers don't want to answer user questions? this topic is almost a week, the question was to reset the phone code, which phone owner will wait so long? If in the future every question will need to wait for a response a week or more, the sense in this forum no....

madgoeslim

smtel Hi,
Sorry for my late reply.
There are already some similar discussions related to the above topic.
It may save you a lot of time if you're willing to use the Search button instead of creating repeated discussions.

smtel

Today is a good day-the phone is successfully connected, although did all the same as before...

phonecode successfully reset - user data was not deleted! but there is one problem- Flyme account.
this problem was described here:
https://ufixers.com/d/1848-meizu-pro-7-plus-flash-repair/3
-Special Task -->Factory reset
-Special Task -->[Meizu] Reset Flyme Account Lock
Not help, now when i turn phone on I see the inscription " phone is locked"

any idea?

Sardor

smtel
for some reason, at me only once sees

ccipo

smtel

U almost.done dud

After [Meizu] Reset Flyme Account Lock

Just contected the phone wifi with internet then
Lock will gone

Sardor

Firmware package: '"""""""1792L_SIGNED_201707081840_release""""""
BROM version[1]: 7.1625.3.0
Loading DA: MTK_AllInOne_DA[oem].bin (8.09 Mi😎
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Done.
Detected MediaTek USB Port (COM52)
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2016
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6757, Hw ver: 0xCB00, Sw ver: 0x0001
Secure ver: 0x00, BL ver: 0x00
Secure config: 0x00
SRAM size: 0 B
DRAM size: 2 GiB
ME ID: be7766863d47863b40dade32f1e41385
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x15 (Samsung)
Product name: DH6DMB (0x444836444d42), rev: 0x05, serial number: 0xFE05C402
Manufacturing date: РёСЋРЅ 2017
CID: 15010044 4836444D 4205FE05 C402643B
Capacity: 58.25 GiB(62,549,655,552 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
USB speed: Full-Speed
Switching to USB High-Speed...
Scanning DA USB High-Speed port... Done.
Detected MediaTek DA USB VCOM (Android) (COM58)
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2016
Verifying SoC: Error: missmatch (MT6757, UNKNOWN_BBCHIP_TEMMC)!
Verifying CID: passed
Error: -1073545201 (STATUS_SCATTER_HW_CHIP_ID_MISMATCH)

not flash

Sardor

Firmware package: """"""20170822104656_intl_prd_fvcs_stable_6.1.3.0G""""""""
BROM version[1]: 7.1625.3.0
Loading DA: MTK_AllInOne_DA[oem].bin (8.09 Mi😎
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Done.
Detected MediaTek USB Port (COM52)
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2016
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6757, Hw ver: 0xCB00, Sw ver: 0x0001
Secure ver: 0x00, BL ver: 0x00
Secure config: 0x00
SRAM size: 0 B
DRAM size: 2 GiB
ME ID: be7766863d47863b40dade32f1e41385
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x15 (Samsung)
Product name: DH6DMB (0x444836444d42), rev: 0x05, serial number: 0xFE05C402
Manufacturing date: РёСЋРЅ 2017
CID: 15010044 4836444D 4205FE05 C402643B
Capacity: 58.25 GiB(62,549,655,552 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
USB speed: Full-Speed
Switching to USB High-Speed...
Scanning DA USB High-Speed port... Done.
Detected MediaTek DA USB VCOM (Android) (COM58)
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2016
Verifying SoC: Error: missmatch (MT6757, UNKNOWN_BBCHIP_TEMMC)!

this too

smtel

I did not try to flash the phone, maybe there would be problems too, need answers from supporters

Sardor

smtel
i flasher "system" "userdata" "cache" but not help

Sardor

ccipo
I tried not to work

smtel

ccipo not help, again "phone is locked"

smtel

Sardor поздравляю)

Sardor

one turned out

Jeremmi

Sardor
which files were flashed or erase?
P.S. to support scatter is not true, you need to correct....I have corrected updated with the firmware format but still " lock"
enter image description here

NIKHIL

Sardor BHAI PLZ HEL MI VCC VCCQ ERROR ALL DEAD PHONE HOW TO USE MY WHATSAPP NO 8600328329

VoTan

Sardor
please hlep me clear phone lock, share solution bro

Alexbrain

Sardor
Помоги ,как ты сделал у меня на руках два про7+ и один про7
аккаунт не снимается ,телефоны конектятся и прошиваются ,но не стираются ?

подскажи пожалуйста как быть?

chenming

Sardor How to remove account locks

extranet1987

Sardor bu meizu pro 7 mi Sardor? qanday qilib ochdingiz?

Alexbrain

smtel
Привет
У тебя получилось снять аккаунт с pro7/plus ??
Если да - то направь пожалуйста ,не понимаю что делать
За ранее спасибо