nokia TA-1029

israr

nokia ta-1029 dead during frp reset via isp point. but there is no image or emmc file for nokia 2 TA-1029 now can you help me and get me out this trouble.. :-( thanks.

madgoeslim

israr Hello,
Can you post the detail log and screenshot regarding to your problems here?

madgoeslim

israr
Just check at support server, there are stock firmware in QFIL format, means this firmware can be use for debrick as well as for full flashing procedure.

joy ufi not support nokia 3..etc..

Hello, for nokia 2, 3, 5, 6 if you have stock firmware and correct loader, you can flash it via ufi android toolbox.
For Nokia newest device, like nokia 3.1, 6.1, and later, need auth by server for flashing in fastboot protocol.
Will support this in upcoming Ufi update.

joy

madgoeslim
ufi not support nokia 3..etc..

israr

Connection status: EHCI:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: FN62MB (0x464e36324d42), rev: 0x03, serial number: 0x99E6EE9B
Manufacturing date: Oct 2017
CID: 15010046 4E36324D 420399E6 EE9BA484
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 512 KiB
User area: 7.28 GiB(7,818,182,656 bytes)

eMMC 5.x HEALTH report:
Device lifetime: Normal
Estimation of the device lifetime (SLC): 0% - 10% device life time used
Estimation of the device lifetime (MLC): 0% - 10% device life time used
moviNAND Smart report:
Error Mode: 0x00000000 (Invalid)
Smart report in MMC5x has changed and not supported for this device(use eMMC 5.x HEALTH report instead).

hafiz4saqib

madgoeslim
And waht about OPPO FLASH after 2019 security ???

goodboy

link update plz

joy

what is the problem!sir,
Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-8698
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 3MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: CKTM4R (0x434b544d3452), rev: 0x00, serial number: 0x1D1AEA0B
Manufacturing date: Jul 2017
CID: 15010043 4B544D34 52001D1A EA0B7422
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

Factory erase... failed !
Reseting PART_CONFIG... [179]Failed to Switch (return code: 1, CMD Error: Timeout) !!!
failed !
Reseting BOOT_BUS_CONDITIONS... [177]Failed to Switch (return code: 1, CMD Error: Timeout) !!!
failed !

madgoeslim

hafiz4saqib Oppo flashing with auth will be add later after this release.

hafiz4saqib

madgoeslim
I am waiting specially Oppo Auth .....