what problem on my box?

ChanRattanak

Now my problem solved by check cmd pin again

Connection status: EHCI:HUB:HUB:USB 2.00 High-speed
Interface: UFI High-Speed
Serial number: 0011-88xxxxxxxxx
 Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
 Card/BGA: BGA (Discrete embedded) - High density MMC
 Manufacturer ID: 0x45 (SanDisk)
 Product name: SEM08G (0x53454d303847), rev: 0x22, serial number: 0x43510F8E
 Manufacturing date: Jul 2015
CID: 45010053 454D3038 47224351 0F8E72C6
CSD: D00F0032 0F5903FF FFFFFFFF 8A40407E
EXT_CSD revision: 1.6 (MMC v4.5, v4.51) 
Partition info:
 Boot1: 2048 KiB
 Boot2: 2048 KiB
 RPMB: 2048 KiB
 User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x08
 No boot acknowledge is sent (default)
 Boot partition 1 is enabled for boot
Partitioning support: 0x05
 Device support partitioning feature
 Device cannot have enhanced technological features
 Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
  Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
 Power-on write protection: possible
 Permanent write protection: possible
 Lock status: not locked
User area write protection: 0x50
 Password protection features: enabled 
 Power-on write protection: possible
 Permanent write protection: not possible
 Lock status: not locked
EXT_CSD backup saved to "\\%BACKUPS%\SEM08G_43510F8E.ext_csd"

ANDROID ROM info:
 platform: hi6210sft, cpu abi: armeabi-v7a
 manufacturer: HUAWEI
 board: BalongV8R1SFT, name: hi6210sft
 brand: Honor, model: 
 build id: KOT49H, version: 4.4.2 KitKat (BalongV100R001C50B311)
 build description: hi6210sft-user 4.4.2 KOT49H eng.jenkins.20151209.184917 test-keys

Selected: [SanDisk] iNAND SDIN8DE2-8G  (FBGA153)

BorNeo

the is my box error ...direck isp

what the problem is adafter chip ?
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 16, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---

madgoeslim

BorNeo Already answer by box :
--- Check eMMC pins and connection --- --- Try to select correct VCC/VCCQ manually --- --- Try to decrease the clock speed ---

Andikha

what the problem is adafter chip ?
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---

ProOFF

Dead emmc. If emmc Samsung - try testpoint metod.

robin

ProOFF Dead emmc. If emmc Samsung - try testpoint metod

thx for the info

IstiantoCP

my box isp all hand phone
Connection status: EHCI:HUB:USB 2.00 High-speed
Interface: UFI High-Speed
Serial number: 0011-8839-4296
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
VCC, VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---

ProOFF

Box often works poorly on in-circuit connection. Try to additionally connect the phone to usb to the !!!same!!!! computer, to which the UFI BOX is connected.

Rashidul

Hello UFI-box team

How to SanDisk eMMC write Protection remove?

SivaKumar

Rashidul https://drive.google.com/open?id=0BxuF_fMHsnRTX3QyYlZCaFlOc2M

Fendy

plese hlep me
what happens with this error
please its solution

Failed to initialize eMMC (return code: 0, CMD Error: ) !!!
CMD0 error, cmd response: 0x0, card state: 0 (Card is in unknown state)
GO_IDLE_STATE command failed.

Jamil

Fendy same problem with me

mbah_walang

Fendy me too please help

ProOFF

There are available tested and serviceable memory chips in different cases. If there are doubts - we check the work with the help of a working memory chip.
in your case, if the memory chip is installed in the adapter - the chip is dead. If chip is samsung - try to use testpoint metod.

MuhammadAbrar

Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-6938
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... CLK, CMD, DAT0 not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 2.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
--- Try to use 1 bit connection ---
plz help

YasirGsm

MuhammadAbrar Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-6938
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... CLK, CMD, DAT0 not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 2.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
--- Try to use 1 bit connection ---
plz help

emmc not contct dis err help

madgoeslim

YasirGsm Try with this methode : https://ufixers.com/d/101-new-ufi-emmc-adapter-not-properly-connected.

SitunNayak

Cdm error time out

Alexid7

Jamil ???????????????????????????????????

smgroupranchi

ailed to initialize eMMC (return code: 6, CMD Error: Invalid Voltage Range) !!!
CMD1 error, cmd response: 0xFF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Card might be DEAD, for some moviNAND(Samsung) devices you may update the eMMC firmware by TP[ \TestPoint ] ! ---
Check your connection, make sure eMMC inserted properly.

smgroupranchi

htc di..... 616h emmc repair ok

flashing erorr
BROM version: 7.1645.3.0
Loading DA: MTK_AllInOne_DA.bin (7.24 Mi😎
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Scanning BootROM or Preloader port... Done.
Detected MediaTek PreLoader USB VCOM (Android) (COM6)
Connecting Bootrom... Done.
Sending download agent... failed
Platform: MT6592_S00, Hw ver: 0xCA00, Sw ver: 0x0000
Secure ver: 0x05, BL ver: 0x00
Sec config: 0x00
SRAM size: 0 B
UNKNOWN RAM size: 0 B
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G1d (0x483447316404), rev: 0x86, serial number: 0x07A2E4C0
Manufacturing date: Oct 2013
CID: 90014A48 34473164 048607A2 E4C0A0E9
Platform: MT6592_S00, Hw ver: 0xCA00, Sw ver: 0x0000
Sec config: 0x00
Error: 4032 (S_FT_ENABLE_DRAM_FAIL)
[H/W] DRAM detection failed at stage 2!